Support Articles

The Lithium Battery Solar Panel (SPLB-22) comes with many cables. It’s important to use the right one to connect your SPYPOINT camera.

1. Use the supplied 1.5 mm cable from the camera to the 12V output port on the back of the solar panel.

2. Route the cables along the mounting bracket and as close to the camera. Excess cable length should be tucked behind the panel or camera. It will help to prevent animal chewing or tearing the cable.

3. Check both ends of the cables are installed completely and securely.

4. Test it. Turn the camera ON and trigger a photo. Check for this test photo in your app before leaving the area.

NOTE: the Lithium Battery Solar Panel charges only its integrated lithium battery and powers the camera. It will not charge a lithium battery pack (LIT-22, LIT-10) in the camera.

_{Posted on March 15, 2023}